Suelos de vínilo - Características técnicas

Design, strength and versatility

Technical characteristics of vinyl planks and tiles

No.CharacteristicsMethodsResultsConclusion
1Determination of dimensional stability and curling after exposure to heatEN 649:2011 and in reference to EN 434:1994X-axis variations: 0.05%
Y-axis variations: 0.06%
Curling: 0.05 mm
Positive
2Determination of natural length, squareness and straightness of tilesEN 649:2011 and EN 427:1994See test resultsPositive
3Determination of overall thicknessEN 649:2011 and EN 428:1993Mean: 4.99 mm
Maximum: 5.01 mm
Minimum: 4.97 mm
Positive
4Wear resistanceEN 660-2:1999+ A1:2003 and EN 649:20111,2 mm3/100 revolutionsGroup T
5Determination of residual indentation after static loadingEN 649:2011 and EN 433:1994Residual indentation: 0.08 mmPositive
6Determination of mass per unit areaEN 649:2011 and EN 430:19945,640 g/m2Positive
7Determination of flexibilityEN 649:2011 and EN 435:1994
Method A
No cracking was observed in any direction upon testing with a 20 mm diameter mandrelPositive
8Colour fastness to lightEN 649:2011 and EN ISO 105-B02:2014
Method 3
6 or betterPositive
No.CharacteristicsMethodsResults
1Slip resistanceEN 14041:2004/AC:2006 section 4.5 and EN 13893:2002Technical class DS
2Reaction to fireEN 14041:2004/AC:2006 section 4.1Class EfL
3Thermal conductivityEN 12667:2001 Heat flow meter methods0,079 W/(m·K)
4Pentachlorophenol (PCP)Pursuant to EN 14041:2004 Annex B and EN 12673:1999, the analysis was done using gas chromatography mass spectrometryNot detected
5FormaldehydePursuant to EN 717-1:2004, the ultraviolet-visible B99spectroscopic analysis was doneNot detected
6Domestic and Commercial Resilience ClassificationPursuant to standard EN 10874Heavy: 23 and 33 respectively
No.CharacteristicsMethodsResultsConclusion
1Determination of dimensional stability and curling after exposure to heatEN 649:2011 and in reference to EN 434:1994X-axis variations: 0.05%
Y-axis variations: 0.06%
Curling: 0.05 mm
Positive
2Determination of natural length, squareness and straightness of tilesEN 649:2011 and EN 427:1994See test resultsPositive
3Determination of overall thicknessEN 649:2011 and EN 428:1993Mean: 4.99 mm
Maximum: 5.01 mm
Minimum: 4.97 mm
Positive
4Wear resistanceEN 660-2:1999+ A1:2003 and EN 649:20111,2 mm3/100 revolutionsGroup T
5Determination of residual indentation after static loadingEN 649:2011 and EN 433:1994Residual indentation: 0.08 mmPositive
6Determination of mass per unit areaEN 649:2011 and EN 430:19945,640 g/m2Positive
7Determination of flexibilityEN 649:2011 and EN 435:1994
Method A
No cracking was observed in any direction upon testing with a 20 mm diameter mandrelPositive
8Colour fastness to lightEN 649:2011 and EN ISO 105-B02:2014
Method 3
6 or betterPositive
No.CharacteristicsMethodsResults
1Slip resistanceEN 14041:2004/AC:2006 section 4.5 and EN 13893:2002Technical class DS
2Reaction to fireEN 14041:2004/AC:2006 section 4.1Class EfL
3Thermal conductivityEN 12667:2001 Heat flow meter methods0,079 W/(m·K)
4Pentachlorophenol (PCP)Pursuant to EN 14041:2004 Annex B and EN 12673:1999, the analysis was done using gas chromatography mass spectrometryNot detected
5FormaldehydePursuant to EN 717-1:2004, the ultraviolet-visible B99spectroscopic analysis was doneNot detected
6Domestic and Commercial Resilience ClassificationPursuant to standard EN 10874Heavy: 23 and 33 respectively

FOAM FLOORTAPE

foam

VINYL EVA 1.5 mm

The high-performance Goma Vinyl Eva 1.5mm HD flooring is recommended because of its high density. It provides the perfect subfloor surface needed for the correct installation of your floating floor.

Characteristics

TESTSSTANDARDRESULT
DensityEN 1849-1250 Kg/³
Thermal ConductivityISO 83010.036w/m.k
Impact sound insulation140/826Db
Fire ClassificationEN ISO 13501B
Fire ResistanceDIN 4102BFL-s1
Combustion SpeedISO 3795>10
Thickness

1.5mm ± 8%
m² / roll

20
Dimensions

100×1200

antiestatico - Características técnicas

Anti-static
0%
resistencia a la carga - Características técnicas

Load resistance
0%
nivelacion - Características técnicas

Levelling
0%
baja absorcion de agua - Características técnicas

Low water absorption
0%
aislamiento acustico abajo - Características técnicas

Acoustic insulation
0%
aislamiento acustico arriba - Características técnicas

Acoustic insulation
0%
aislamiento termico - Características técnicas

Thermal insulation
0%
calef radiante - Características técnicas

Underfloor heating
0%
facil instalacion - Características técnicas

Easy installation
0%

COMFORT PREMIUM HD

The high-performance Comfort Premium HD 2mm HDPR flooring is recommended because of its acoustic and thermal insulation properties. It provides the perfect subfloor surface needed for the correct installation of your floating floor.

Characteristics

TESTSSTANDARDRESULT
DensityEN 1849-1250 Kg/³
Thermal ConductivityISO 83010.040w/m.k
Impact sound insulation140/826Db
Fire ClassificationEN ISO 13501B
Fire ResistanceDIN 4102BFL-s1
Combustion SpeedISO 3795>10
Thickness

2mm ± 8%
m² / roll

10
Dimensions

100×1000

antiestatico - Características técnicas

Anti-static
0%
resistencia a la carga - Características técnicas

Load resistance
0%
nivelacion - Características técnicas

Levelling
0%
baja absorcion de agua - Características técnicas

Low water absorption
0%
aislamiento acustico abajo - Características técnicas

Acoustic insulation
0%
aislamiento acustico arriba - Características técnicas

Acoustic insulation
0%
aislamiento termico - Características técnicas

Thermal insulation
0%
calef radiante - Características técnicas

Underfloor heating
0%
facil instalacion - Características técnicas

Easy installation
0%